beautypg.com

Mallory Ignition Lakewood Safety bellhousing 15210_15220 User Manual

Page 2

background image

PN 97140239

©2000

Cleveland, Ohio

216.688.8300

www.mrgasket.com

SAFETY BLOCKPLATE FASTENER

REQUIREMENTS AND LOCATION

IMPORTANT: All fasteners must be used in their proper location

for the bellhousing to meet S.F.I 6.1 safety requirements.

LAKEWOOD 15210 SERIES FASTENER REQUIREMENTS

Ford 390, 406, 427 & 428

For this product to meet SFI specification 6.1

the fasteners listed below must be used.

A = 1/2 - 13 x 1" GRADE 8 BOLTS, WASHERS & NUTS.
B = BELLHOUSING LOCATING PINS (NOT INCLUDED).
C = 7/16 - 14 x 1" GRADE 8 CAP SCREWS.
D = 3/8 - 16 x 1" GRADE 8 BOLTS, WASHERS & NUTS.
E = GRADE 5 STARTER BOLTS.

LAKEWOOD 15220 SERIES FASTENER REQUIREMENTS

Ford 351M, 400, 429 & 460

For this product to meet SFI specification 6.1

the fasteners listed below must be used.

A = 1/2 - 13 x 1" GRADE 8 BOLTS, WASHERS & NUTS.
B = BELLHOUSING LOCATING PINS (NOT INCLUDED).
C = 7/16 - 14 x 1" GRADE 8 CAP SCREWS.
D = GRADE 5 STARTER BOLTS.

* These holes may not be present in some blocks. If present, their

use is recommended for additional safety.

15741

15729