Luminex IS 2.3 to xPONENT 3.1 Rev 2 Upgrade Instructions - Manual (Page 8)

Luminex IS Version 2.3 Upgrade Instructions to xPONENT 3.1 Rev 2 - For In Vitro Diagnostic Use
4
• Luminex xPONENT 3.1 Rev 2 Software Manual on CD
These hardware items are part of the upgrade kit only if you purchase
them from Luminex:
•
PC
• A touchscreen monitor or a flatscreen monitor
• XYP
These license packages are part of the upgrade kit only if you
purchase them from Luminex:
•
21 CFR Part 11 package
• LIS package
• Automation package
• Security package
• Extra seats package
Upgrade
Instructions
You must run Luminex xPONENT 3.1 on a PC which meets the
minimum specifications listed in "System Requirements" on page 3.
If your existing PC does not meet these requirements or if you are
using a PC that meets the requirements but was not purchased from
Luminex, contact Luminex Technical Support. See "Luminex
Contact Information" on page 12.
Export Files
Export the files that you want to import into xPONENT 3.1. There
are three kinds of files you can import and convert:
• IS 2.3 templates (IDT files)
• IS 2.3 assay lots (LIF files)
• IS 2.3 batches (CSV files)
If your version of IS 2.3 does not include Developer’s Workbench,
the software required to create templates, you cannot export template
files. Developer’s Workbench is not required to export assay lots and
batches.
To export an assay lot file:
1. On the Home tab, click New Lot. The Open Template dialog
box opens.
2. Double click the template with the lot you want to export. The
Update Lot Information dialog box opens.
3. Click Export Lot.
4. In the standard or control confirmation dialog box that opens,
click Yes to export the lot information for the standards or click
No to export the lot controls only.
5. In the second dialog box that opens, click to confirm that you
want to export the current control lot or the current lot for a
control.