Magnum Venus Plastech High Volume Pro Gun 60625-1 - Manual (Page 20)

High Volume Pro Gun Manual
Rev. 05/2012 Page | 20
FLUSH VALVE BODY -
AUTO/MANUAL
SPRING
SEAL
O-RING
O-RING
FLUSH SEAL BODY
FLUSH VALVE NECK
FLUSH VALVE BUTTON
SPLIT SEAL
FLUSH VALVE BODY
10. Use a scribe to remove the o-ring (O-K-008) from the flush valve button.
11. Remove the o-ring (O-A-007) from the flush seal body (5104-23-1).
12. Set parts aside for now or go down to flush valve assembly
13. Discard and replace the flush valve’s o-rings and seals, after reading the note
below.
Note: Do not replace o-ring (O-K-008) unless it is worn or damaged. This o-ring is
designed for use with all solvents. In some cases O-K-008 o-ring can be replaced
with the more economical o-ring (O-E-008).