beautypg.com

Magnum Venus Plastech SUPER PRO GUN II User Manual

Page 7

background image

SUPER PRO GUN &

SUPER PRO GUN II

NOTE

The Piston should be inserted “bushing end first”, with the bushing on the top
side of center.

5.

Install the two 5106-4-1 (Cylinder Caps).

6.

Place the 5106-2-1 (Actuator Seal) over the 5106-1-01 (Cylinder Body)

so

the Mounting screw holes line up.

7.

Place the 5104-00-01 (Gun Block Assembly) onto the 5106-2-1 (Actuator
Seal.

8.

Secure the 5104-00-01 (Gun Block Assembly) onto the 5106-01-01 (Gun
Actuator) with the four 5106-6-1 (Mounting Screws) and the 5106-3-1
(Mounting Seals).

NOTE

The 5104-11-1 (Actuating Stem) must be inserted into the 5106-5-1
(Bushing) located in the 5106-7-1 (Actuating Piston).

2

This manual is related to the following products: