beautypg.com

Fig. 4.7 idler adjustment – Magnum Venus Plastech SUPER PRO GUN II User Manual

Page 23

background image

SUPER PRO GUN &

SUPER PRO GUN II

NOTE

Proper adjustment has Idler Assembly touching the Rubber Roll, but still able
to rotate with minimum effort.

Fig. 4.7

Idler Adjustment

1.

Slightly loosen the 7102-2-20 (Socket Head Cap Screw), just
enough so the Idler Assembly will slide in the T-Slot. See Fig. 4.7.

2.

Slide the 5103-7-01 (Sleeve w/ Bearing) until it just makes contact
with the 5106-6-1 (Rubber Roll).

18

This manual is related to the following products: