Super pro gun gun block assembly – Magnum Venus Plastech SUPER PRO GUN II User Manual
Page 12
SUPER PRO GUN &
SUPER PRO GUN II
7
SUPER PRO GUN
Gun Block Assembly
5104-00-01
Chapter
3
1.
Install the 7301-11-008 (O-Ring) onto the 5104-25-1(Flush Valve
Button).
2.
Install the 7301-3-007 (O-Ring) onto the 5104-23-1 (Flush Seal
Body).
3.
Install the 9203-2-3 (Compression Spring) into the 5104-24-1
(Flush Valve Body).
4.
Smear 6706-2-1 (White Grease) onto the 5104-25-1 (Flush Valve
Button), and the 5104-23-1 (Flush Seal Body). Thread the Flush
Valve Button through the 9203-2-3 (Compression Spring) located
in the 5104-24-1 (Flush Valve Body), and screw on and tighten the
Flush Seal Body.
5.
Install the 5104-26-1 (Flush Valve Seal) onto the 5104-24-1 (Flush
Valve Body) and thread through the 5104-22-1 (Flush Valve Neck).
6.
Install the 5104-02-01 (Flush Elbow Assembly) onto the
5104-22-1 (Flush Valve Neck).
7.
Install the 5104-21-1 (Flush Valve Split Seal) onto the 5104-24-1
(Flush Valve Body).
See Figs. 9.9 - 9.12 for exploded schematic drawings
Flush Valve Assembly