Magnum Venus Plastech Pro Series Mini Pro Gel Coater - Manual (Page 17)

Mini Pro Gel Coater Operations Manual
Rev. 09/2012 Page | 17
Installation and Setup:
1.
Unpack unit & components – report any damaged or missing items
2.
Assemble unit – mount Pump to the cart, install Catalyst Pump onto the Slave
Arms
3.
Install Catalyst Jug into the Catalyst jug bracket
4.
Connect the Relief Valve tube to the top port in the Catalyst Jug.
5.
Connect the Feed tube from the Catalyst jug outlet to the Catalyst pump Inlet.
6.
Connect the Catalyst hose to the Catalyst Pump outlet
7.
Install Gel coat Filter & Surge Chamber assembly
8.
Attach the Gel coat hose to the Outlet of the Filter assembly
9.
Install Air Manifold - connect Air Hose to Powerhead & Air Supply to the Shift
Block.
10. Attach hose fittings, catalyst atomizing hose and gun air supply
11. Attach Pickup Hoses to the Inlet of the pump
12. Double check all hose fittings and connections are tight.
Note: it is important to be sure all fittings and connections are tight to prevent
catalyst or gel coat leaking.