beautypg.com

Frp system one maintenance schedule – Magnum Venus Plastech System One FRP 1300-1-1 User Manual

Page 12

background image

FRP SystemOne
Gelcoater

Daily Maintenance

1.

Drain water trap.

2.

Daily shutdown should include, remove air-assist tip and static
mixers from housing and clean. Remove turbulent mixer and
mix chamber from gun and clean. Lightly dampen a rag with
solvent and wipe down gun head, handle and actuator. Do not
soak gun in solvent.

Weekly Maintenance

Gelcoat Pump Packing Set

Check gelcoat pump piston rod oil reservoir, inspect for gelcoat
bypassing packing set.

1.

Turn pump regulator to zero. Open ball valve at gelcoat filter to
release gelcoat pressure.

2.

Insert a rod or Philips screwdriver into one of the holes in the
gelcoat-packing nut. Snug the packing nut. Do not over tighten.

Power Cylinder

Turn pump regulator to zero. Loosen the air hose fitting and add 10
to 15 drops of 90-weight non-detergent gear oil.

9

Chapter

4

FRP SystemOne
Maintenance Schedule