Lightronics RA122 - Manual (Page 15)

Page 15 of 20
RA – 122 RACK MOUNT ARCHITECTURAL DIMMER
Revision 0.93 OWNERS MANUAL 09/26/2011
www.lightronics.com
Lightronics Inc. 509 Central Drive Virginia Beach, VA 23454 Tel 757 486 3588
A complete layout diagram of the menus for setting
the clock is shown below.
PROGRAMMING EVENTS
Events are programmed using the RA-122 Event
Editor menus.
Programming an event consists of four steps:
1. Select the event you want to set up (1 - 128).
2. Assign a scene (1 - 100) to the event.
3. Select what action is to be performed for that
scene (Turn it ON, Turn it OFF, or IGNORE IT).
4. Assign the DATE/ TIME or DAY(S) / TIME for
the event to be triggered.
The complete event editor menus layout is shown
below.
EVENT
SETCLOCK
SET DATE
00/00/00
SET TIME
00:00
SET DAY
MONDAY
TIMEZONE
-05HrsGM
DST
NO
ENTER
EVENT
SETUP
ENTER
MENU (NEXT) To Other
Menus
MENU (NEXT)
MENU (NEXT)
MENU (NEXT)
MENU (NEXT)
MENU (NEXT)
EVENT
SYS OFF
MENU (NEXT)
Note: Time Zone
and DST (Daylight
Saving Time) are
not currently used.
MENU (NEXT)
EVENT
EDITOR
EVENT #
001
EVNT 001
S00O ON
E001S000
DATE
E001S000
01/01
E001S000
00:00
E001S000
SMTWTFS
ENTER
ENTER
DATE DAYS
MENU (NEXT)
MENU (NEXT)
MENU (NEXT) MENU (NEXT)
EVENT
SYS OFF
MENU (NEXT)
EVENT
SETUP
ENTER
MENU (NEXT) To Other
Menus
EVENT
SETCLOCK
MENU (NEXT)