Liquid Controls Mechanical Eliminators - Manual (Page 3)

3
safeTy ProCedUres
! WarnInG
• Before using this product, read and understand the instructions.
• All work must be performed by qualified personnel trained in the proper application, installation, and
maintenance of equipment and/or systems in accordance with all applicable codes and ordinances.
• When handling electronic components and boards, always use proper Electrostatic Discharge (ESD)
equipment and follow the proper procedures
• Make sure that all necessary safety precautions have been taken.
• Provide for proper ventilation, temperature control, fire prevention, evacuation, and fire management.
• Provide easy access to the appropriate fire extinguishers for your product.
• Consult with your local fire department, state, and local codes to ensure adequate preparation.
• Read this manual as well as all the literature provided in your owner’s packet.
• Save these instructions for future reference.
• Failure to follow the instructions set forth in this publication could result in property damage, personal injury, or
death from fire and/or explosion, or other hazards that may be associated with this type of equipment.
be Prepared
This manual provides warnings and procedures that are intended to inform the owner
and/or operator of the hazards present when using the Liquid Controls Meter on LP-
Gas and other products. The reading of these warnings and the avoidance of such
hazards is strictly in the hands of the owner-operators of the equipment. Neglect of
that responsibility is not within the control of the manufacturer of the meter.
noTICe