Lectrosonics SM - Manual (Page 11)

Super-Minature Belt Pack Transmitter
The Lock mode protects the transmitter from accidental
changes to its settings.
1. Ensure the SM setup is complete (operating fre­
quency, audio level, Compatibility Mode, sensitivity
to remote control).
2. Simultaneously press both the Up and Down arrow
buttons to start the Lock
timer. When the timer
reaches zero, “Loc” is dis-
Loc
played and the controls are
Control Panel Locked locked.
Important: Once the transmitter is locked, it
cannot be unlocked or powered off using the
buttons. The only ways to unlock a locked
transmitter are to remove the battery or unlock
it via the remote control. The remote control
will work only if the transmitter was previsouly
configured to respond to the remote control.
Lock mode does not persist when the power is
off.
Rio Rancho, NM 11