ADC Wireless Repeaters InterReach - Manual (Page 3)

7/08
•
105105AE
In-building
W
ir
eless
Repeaters
InterReach ® In-building Wireless Repeaters
850 MHz Cellular and 1900 MHz PCS
3 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
GUI Features
Automatic Level Control (ALC)
The system will control the output power to maintain the stability and protect the unit.
Sleep Mode
Mode is activated when the reverse output RF power shows below -65dBm for over 3 minutes. The system
re-activates to the wake up mode if the signal reaches over -65dBm.
Band Selection
The repeater offers programmable band selection.
Isolation Check
There is isolation check for the forward path and reverse path when the system is set up and powered on.
User-friendly Interface
USB connection allows you to control:
• sleep mode
• band selection
• on/off system controls
Over Power Shut Down
The system can detect if there is excessive power and will shut down to protect the unit and will
automatically resume operation when normal power levels are reached.
Description Catalog Number
Single Band 850 Cellular Repeater, 13dBm, 60dB gain and Accessory Kit RPT-SBBAA12000
Single Band 1900MHz PCS Repeater, 13dBm, 60dB gain and Accessory Kit RPT-SHAAA12000
Spare Accessories (included in Accessory Kit)
A to A USB Cable RPT-ACCUSBCABLE
Mounting Plate RPT-ACCHDWR
6V Power Supply RPT-ACCPS
Software and User Doc RPT-ACCSOFTWARE
O r d e r i n g I n f o r m a t i o n
Donor antennas, service antennas, coax and other accessory materials are also available from ADC.