Features – LEADER LV7800 User Manual
Page 6
30
LV 58SER02 EYE PATTERN UNIT (HD-SDI, SD-SDI)
Plug-In Unit
LV 58SER03 COMPOSITE VIDEO INPUT UNIT
Plug-In Unit
The LV 58SER02 is an optional unit that
can be inserted into an LV 5800 (MULTI
MONITOR) input slot or the LV 7800
(MULTI RASTERIZER), and it can be used
to display eye patterns. The LV 58SER02
can be used to display the eye patterns of
SDI signals and measure jitter when it is
used with the LV 58SER01A (SDI INPUT),
and it can be used to display the eye pat-
terns of DVB-ASI signals when it is used
with the LV 58SER04 (MPEG DECODER).
FEATURES
• Supports HD-SDI, SD-SDI and DVB-ASI
• 6 Systems of Eye Pattern Displays and
Jitter Measurement
Displays the SDI signal eye pattern or measures the jitter of 1
system among up to 6 systems by combining 3 SDI input units
and selecting A or B among the 3 modules. (2 Eye units cannot
be installed simultaneously.)
• Eye Pattern Display
Displays the eye pattern of the timing jitter or alignment jitter by
switching the filter.
• Jitter Measurement
The jitter measurement by the phase detection method allows
accurate jitter measurement even if the eye is barely open. In
addition, timing jitter and alignment jitter can be measured.
• Automatic Measurement
The eye pattern display allows automatic measurement of the
eye pattern amplitude, rise time, and fall time. The jitter display
allows automatic measurement of the timing jitter and align-
ment jitter values.
• Jitter Display Using Video Sweep
Allows V sweep and H sweep displays.
• Simultaneous Display on the Multi Display
The multi display allows the eye pattern waveform and jitter
waveform to be displayed simultaneously. In addition, the eye
pattern display screen automatically measures the eye pattern
amplitude, rise time, and fall time, while the jitter display screen
automatically measures the timing jitter and alignment jitter.
• Alarm Monitoring
The alarm monitor mode allows the eye pattern amplitude, rise
time, and fall time to be monitored with respect to the threshold
level specified in advance. It also monitors the timing jitter and
alignment jitter using the phase detection method. An alarm is
displayed when the threshold level is exceeded. The alarm can
also be logged.
Supported Formats
Data Rate
HD-SDI
SD-SDI
Eye Pattern
Display
Method
Amplitude Accuracy
Time Axis
Time Axis Accuracy
Jitter Filter
Jitter Detection
Method
Amplitude Accuracy
Time Axis
Time Axis Accuracy
Jitter Filter
Cursor Measurement
Automatic Measurement
Power Consumption
Weight
Accessories
LV 58SER02 EYE PATTERN UNIT SPECIFICATIONS
SMPTE292M 1.485 Gbps, or 1.485/1.001 Gbps
SMPTE259M 270 Mbps
Displays the input waveform before equalizing
Equivalent time sampling method
800 mV ±5 % for 800 mV input
2 / 4 / 16 Eye pattern Display
±3 %
10 Hz
HPF
100 Hz
HPF
1 kHz
HPF
100 kHz HPF
Phase detection method
±10 % (typical value for when the input jitter is 1
UI, input jitter frequency is 10 kHz, the filter setting
is 100 Hz, and the gain setting is x8)
H rate or V rate
±3 %
10 Hz
HPF
100 Hz
HPF
1 kHz
HPF
100 kHz HPF
Jitter measurement using cursors
Displays the amount of jitter in seconds (sec) and
unit intervals (UIp-p)
(* Doesn't support JITTER measurement of a
DVB-ASI standard Eye pattern only.)
Supplied from the instrument;
20 Wmax.
0.4 kg, 0.9 lbs.
Coaxial cable.......................................................1
Instruction manual ...............................................1
This unit is installed in the LV 5800 (MULTI
MONITOR) or LV 7800 (MULTI RASTERIZ-
ER), and it is used to display and measure
the analog NTSC or PAL video signals.
The LV 5800's newest functions related to
waveforms such as the waveform monitor,
vectorscope, simple picture monitor, and
EXT REF phase display function can be
used on analog video signals of NTSC and
PAL formats.
For a description of the specifications
other than those of this newly added
option, see the specifications of the stan-
dard model.
This unit in combina-
tion with the LV
58SER01A is suit-
able for monitoring in
a mixed environment
containing SDl and
composite signals.
FEATURES
• Input/Output
There are two input connectors: INPUT A and INPUT B.
The selected channel is output from the PIX OUT connector on
the rear panel.
• Display
Waveform display, vectorscope display, picture display, and
EXT REF phase display function are available.
In addition, the luminance component can be displayed using
a low-pass filter.
• SCH Measurement Function
You can perform SCH measurements which are essential when
editing the composite signal.
• EXT REF Phase Display Function
Compares the input signal to the V.H sync signal of the external
reference signal and displays the phase difference numerically
and graphically.
This function makes synchronization phase management easy.
• Miscellaneous
Cursors can be used to measure the amplitude and time, with
high accuracy.
LV 5800/LV 7800 Platform Options
Eye Pattern
Jitter
Composite
SD-SDI
HD-SDI
Leader Instruments Corporation web :
http://www.LeaderUSA.com
Tel. : 1 (714) 527‐9300
6484 Commerce Drive, Cypress, CA 90630
e‐mail :
Fax : 1 (714) 527‐7490