Impulse 2105R - Manual (Page 15)

Remove Software Using Control Panel
Make sure you have first removed the hardware using the instructions on the
previous page before removing the software, otherwise remnants of the
configuration settings will be left on your system. Keep the SeaLINK device
plugged in until the software has been completely uninstalled.
1. Access the Control Panel by clicking the ‘Start’ button, and then ‘Control
Panel’.
2. In the Control Panel window, double-click the ‘Add or Remove Programs’
icon (In Windows Vista, double-click on ‘Programs and Features’).
3. The Add or Remove Programs window will list all currently installed
software on your system. It may take awhile to load all of the software
installed. Locate the entry for ‘SeaCOM’ and click to highlight.
4. Click the ‘Remove’ button.
5. The ‘SeaCOM – InstallShield Wizard’ window will appear along with a
dialog box asking you to confirm. Click the ‘Yes’ button to continue.
6. When the uninstallation completes, click the ‘Finish’ button to close the
window. Click the ‘Ok’ button on the dialog box.
If you are upgrading, leave the SeaLINK device plugged in and proceed to the
Upgrade Instructions section.
If you want to completely remove the hardware and software from your computer,
unplug the SeaLINK device from the USB port, and then reboot your computer to
complete the uninstallation.
© Sealevel Systems, Inc. - 13 - SeaLINK+232-DB9 User Manual