Impulse 7402 - Manual (Page 4)

Introduction
Sealevel Systems ULTRA COMM+422.PCI Page 1
Introduction
Overview
The Sealevel ULTRA COMM+422.PCI is a four channel PCI Bus serial I/O
adapter for the PC and compatibles supporting data rates up to 460.8K bps.
RS-422 provides excellent communications for long distance device connections
up to 4000ft., where noise immunity and high data integrity are essential. Select
RS-485 and capture data from multiple peripherals in a RS-485 multidrop
network.
In both RS-485 and RS-422 modes, the card works seamlessly with the standard
operating system serial driver. In RS-485 mode, our special auto-enable feature
allows the RS-485 ports to be viewed by the operating system as a COM: port.
This allows the standard COM: driver to be utilized for RS-485 communications.
Our on-board hardware automatically handles the RS-485 driver enable
What’s Included
The ULTRA COMM+422.PCI is shipped with the following items. If any of
these items are missing or damaged, contact the supplier.
• ULTRA COMM+422.PCI Serial I/O Adapter
• Serial Utility Software
• “Spider” Cable providing 4 DB-9 connectors
• User Manual
Factory Default Settings
The ULTRA COMM+422.PCI factory default settings are as follows:
Port # Clock DIV Mode Enable Mode
Port 1 4 Auto
Port 2 4 Auto
Port 3 4 Auto
Port 4 4 Auto
To install the ULTRA COMM+422.PCI using factory default settings, refer to
Installation on page 9.
For your reference, record installed ULTRA COMM+422.PCI settings below:
Port # Clock DIV Mode Enable Mode
Port 1
Port 2
Port 3
Port 4