Impulse 7205 - Manual (Page 3)

Figures
Figure 1- Headers J1B and J2B, RS-422 ............................................................................................................2
Figure 2 - Headers J1B and J2B, RS-485 ‘Auto’ Enabled, with ‘No Echo’ ....................................................2
Figure 3 - Headers J1B and J2B, RS-485 ‘Auto’ Enabled, with ‘Echo’ ..........................................................3
Figure 4 - Headers J1B and J2B, RS-485 ‘RTS’ Enabled, with ‘No Echo’.....................................................3
Figure 5 - Headers J1B and J2B, RS-485 ‘RTS’ Enabled, with ‘Echo’...........................................................3
Figure 6 - Headers J1A and J2A, Line Termination .........................................................................................4
Figure 7 - Headers E1 - E4, Electrical Interface Selection................................................................................5
Figure 8 - Asynchronous Communications Bit Diagram ................................................................................14
© Sealevel Systems, Inc.
SL9062 Revision 8/2006
Sealevel Systems, Incorporated. All rights reserved.
.