Impulse 270U - Manual (Page 5)

Installation
Windows 98/ME/2000/XP/Vista™ Operating Systems
1. The SeaI/O-270U is fully supported as a generic USB hub device in Windows
98/ME/2000/XP/Vista™ operating systems and requires no separate driver. The
Sealevel Software CD is included only for distribution of the user manual and
other literature.
2. Simply connect the included wall-mount power supply to the SeaI/O-270U and
connect to an AC outlet.
3. Using the included SeaLATCH USB device cable, plug the SeaI/O-270U into an
available USB port on your host system.
4. The ‘Found New Hardware’ screen will appear and the hub will be automatically
recognized as a generic USB hub device.
5. The hub is ready to use when you see the screen ‘Your USB hub is installed and
ready to use.’
NOTE:
Windows NT is not USB aware and thus cannot support this device.
Linux Support
USB devices are supported in Linux kernel v2.4 or better. Refer to the help files
included with your Linux distribution for specific instructions on adding generic
USB hub devices.
© Sealevel Systems, Inc. - 3 - SeaI/O-270U User Manual