Appendix a - troubleshooting – Impulse 3096 User Manual
Page 17
© Sealevel Systems, Inc.
- 15 -
DIO-16 User Manual
Appendix A - Troubleshooting
Following these simple steps can eliminate most common problems.
1. Install software first. After installing the software then proceed to adding
the hardware. This places the required installation files in the correct
locations.
2. Read this manual thoroughly before attempting to install the adapter in your
system.
3. Use Device Manager under Windows to verify proper installation.
4. Use the SeaIO Control Panel applet or the Device Manager’s property page
for card identification and configuration.
5. The following are known I/O conflicts:
• The 278 and 378 settings may conflict with your printer I/O adapter.
• 3B0 cannot be used if a Monochrome adapter is installed.
• 3F8-3FF is typically reserved for COM1:
• 2F8-2FF is typically reserved for COM2:
• 3E8-3EF is typically reserved for COM3:
• 2E8-2EF is typically reserved for COM4:
6. If these steps do not solve your problem, please call Sealevel Systems’
Technical Support, (864) 843-4343. Our technical support is free and
available from 8:00 AM-5:00 PM Eastern Time Monday through Friday.
For email support contact