Impulse DIO-104.OPTO (3730) - Manual (Page 4)

© Sealevel Systems, Inc. - 2 - DIO-104.OPTO User Manual
Before You Get Started
What’s Included
The DIO-104.OPTO is shipped with the following items. If any of these items is
missing or damaged please contact Sealevel for replacement.
DIO-104.OPTO Adapter
Sealevel SeaI/O Software CD
Optional Items
Depending upon your application, you are likely to find one or more of the
following items useful for interfacing the DIO-104.OPTO to real-world signals. All
items can be purchased from our website (
http://www.sealevel.com ) or by calling
(864) 843-4343.
40-Pin IDC to DB-37 Female 8” Ribbon Cable (Part Number CA211)
− For compatibility with other Sealevel digital I/O devices, the CA211
connects to the 40-pin header connector on the DIO-104.OPTO and
provides a DB-37 Female connector.
DB-37 Male to DB-37 Female 6’ Cable - (Part Number CA112)
− This cable extends the DB-37 connector on the DIO-104.OPTO to six
feet and is pinned one-to-one.
DB-37 Male/Female Terminal Block (Part Number TB02-KT)
− Break out serial and digital connectors to 37 screw terminals for easy
field connection. The TB02 terminal block is designed with both DB-
37 male and female connectors, therefore; it can be used with any
DB-37 board regardless of the board's port gender.
Cable and Terminal Block Kit (Part Number KT101)
− For convenient and easier ordering, the KT101 includes the TB02-KT
terminal block and CA112 cable in a single kit.