Impulse IPC122-833-FL - Manual

* All specifications and photos are subject to change without notice. 335
IPC122-833-FL
NEW
● Intel ® Atom™ processor N2800 1.86 GHz
● DDR3-800/1066 SO-DIMM supports up to 4 GB memory
capacity
● Fanless operation
● Operating temperature range of -10°C ~ +60°C
● Isolated RS-232/422/485, CAN Bus and DIO
● IEC61850-3 and IEEE1613
Specifications
Standard Color Silver
Construction Heavy-duty cold-rolled steel, IP30
CPU Intel ® Atom™ processor N2800 1.86 GHz onboard
System Board SBC87833
BIOS AMI UEFI BIOS
System Memory 1 x 204-pin DDR3-800/1066 SO-DIMM, max. up to 4 GB
I/O Interface (Front) 1 x Power on/off , 1 x Reset , 2 x USB 2.0
I/O Interface
(Rear)
Serial Port 2 x isolated RS-232
8 x isolated RS-232/422/485
ESD protection: 2.5KV
LAN 4 x 10/100/1000Mbps Ethernet
Magnetic isolation protection: 1.5KV
USB 4 x USB 2.0
DIO 1 x isolated DI/DO (4-IN/4-OUT)
DI:
Input range: 0~30VDC at 25Hz
Logic level 0: Close to GND
Logic level 1: Open
DO:
Logic level 0: +/-12VDC min to +/-30V max. (source to DI)
Logic level 1: 0 min. to +/-3VDC max.
VGA 1 x DB15 connector
Power Input 1 x AC/DC power input with terminal block
CAN Bus
1 x CAN Bus (DB9 Connector)
Magnetic isolation protection: 2.5KV
Watchdog timer 1 sec, 255 levels
LEDs System: Power, HDD
Gigabit LAN: 10/100/1000 Link LED x 8
Serial: TX x 10, RX x 10
Digital I/O : LED x 8
Storage 1 x on board CFast™ socket
1 x 2.5" SATA HDD drive bay
Installation Rack mount
Power Supply Power Input Range 130~370VDC & 85~264VAC
Power Protection
SCP (Short Circuit Protection)
OVP (Over Voltage Protection)
Power Consumption 45W
Certification IEEE61850-3, IEEE1613
1U Fanless Barebone System with Intel ®
Atom™ Processor N2800, Multiple LAN and
Multiple COM
Features
Fanless Low Power IP30 Extended
Temperature
CAN Bus DDR3
DDR3 DDR3
Rear view
Front view
CFast™ socket for storage
Power Input with terminal block
DRAM Socket
Supports one
2.5" SATA HDD