Impulse R17L500-65A1-1 - Manual

Mechanical Drawing
Full IP65 Chassis LCD
17" with optical bonding(Moisture Prevention)
Specifications
* Note: this is a simplified drawing and some components are not marked in detail.
Please contact our sales representative if you need further product information.
2
Model Name
Viewable Size Image
Active Display Area(mm)
Pixel Pitch(mm)
Number of Pixels
Contrast Ratio
Display Color
Brightness(cd/m)
Viewing Angle(CR>=10)
Synchronization Range
Horizontal/Vertical
Recommended Resolution
Signal Connector
I/O
Power Source
Power Consumption
Power Management
Plug & Play
Optional Touch Screen
Optional video
protection glass
(Optional, Reflection rate<0.5%)
R17L500-65A1-1
17"
337.92 (H) x 270.34 (V)
0.264 (H) x 0.264 (V)
1280x1024
1000:1(typ.)
16.7M
350(typ.)
-85~85(H);-80~80(V)(typ.)
31.5~80.0KHz / 60~75Hz
1280x1024@60HZ,75HZ
15 pin D-Sub
3 pin Power cable(IP65 connector);
10 pin VGA cable (IP65 connector);
Optional 10 pin RS232 or USB cable(IP65 connector)
12V DC in, with External AC to DC Adapter (100~240V AC)
32W typical, normal operation
VESA DPMS Compliant
VESA DDC 1/2B
Resistive
YES(either touch or glass is a mu st)
Yes
Optional:
black, high polish, vanished coating
Standard:
brushed stainless
*Due to Panel material's deviation, different panel supplier will set different specific
variance range to optical characteristics. The factors of time used, Lamp current,
Ambient temperature will influence the optical measurements.
Rev. Reasons Revised Date
1.1 Spec change Dec-13-10
1.2 Spec change Jan-10-11
1.3 Spec change Nov-13-12