Impulse MMD-2213M - Manual

MMD-2213M
12
-bit
54cm(21.3”) Diagnostic Grayscale Monitor
2MP
GeniGUARD® Backlight Stabilizer
Backlight Stabilizer
The GeniGUARD® built-in backlight stabilizer integrated in
PACSmate® monitors automatically calibrates the shift of LCD
brightness caused by startup drift, ambient temperature and
backlight aging.
GrayBoost® 12-bit Simultaneous Grayscale
12-bit (4096 tones) image input can be all retained in 12-bit (4096
tones) image output via built-in 12-bit LUT. The GrayBoost®
technology successfully produces 12-bit image data flow through
commercial dual-link graphic card, lowering total cost of ownership.
12-bit 8-bit
Original Factory Calibration Meets AAPM TG18 & DIN
6868-57 standards
Uniform Luminance
Uniform luminance is especially critical for diagnostic applications and
PACSmate sets a high standard for the uniformity of every medical monitor.
PACSmate 's special testing equipment ensures every customer gets the
medical monitors with best uniformity for precise diagnostic results.
GrayEasy® HDMI TM 1.3 Grayscale Support
The GrayEasy® technology successfully produces a HDMI TM 1.3
compatible, 12-bit grayscale display system without any additional
upgrade cost. The built-in 12-bit to 12-bit Look-Up-Table (LUT) for
DICOM calibration ensures the quality of grayscale images.
21.3” grayscale TFT LCD
2MP-1600(H) x 1200(V)
Max. luminance: 1000cd/m²
Max. calibrated luminance: 600cd/m²
700:1 exceptional contrast ratio
Out-of-box DICOM compliant
Intelligent display mode auto adjustment with graphic card auto detection
GrayBoost® 12-bit to 12-bit LUT provides simultaneously 4,096 tones of gray
Ready for Deep color and HDMI™ 1.3 with GrayEasy® technology for 12-bit
grayscale displaying
Display Mode Auto-Detection
PACSmate medical monitors have built-in auto-detection technology
which identifies different graphic cards automatically and self adjusts the
mode fit with the specific graphic card.
Customer Assurance
PACSmate series are applied to the following safety standards, including
UL 60601-1, CE (EN 60601-1-2), FCC Part 18, TÜV GM, VCCI, BSMI
and CCC.