Impulse R23L100-MRS1 User Manual
Marine bridge system display, Features: mechanical design drawings
Model # R23L100-MRS1
Marine Bridge System Display
23.1"
Marine Bridge System Display
23.1"
Sunlight Readable
Features:
Mechanical Design Drawings
TFT Characteristics:
Pixel Number
Pixel Pitch(RGB)
Contrast Ratio
Light Intensity
Viewable Angles
Active Display Area
Max Colors
1600 x 1200
0.255 (H) x 0.255(V) mm
700:1(typ.)
2
300 cd/m (typ.)
-89~89(H);-89~89(V)
408.0 (H) x 306.0(V) mm
16.7M (8bit/colors)
:
:
:
:
:
:
:
User Controls:
Input Signals:
RGB Signal
Composite Video
S-Video Signal
DVI-D Signal
DC Power Signal
AC Power Signal (Optional)
Touch Screen (Optional)
Remote via RS-232 (Optional)
:
:
:
:
:
:
:
:
Power On/Off via front button
VR Brightness Knob Control
Power Mode Status LED
On Screen Display control(OSD)
OSD Remote Control via RS-232
Note: All Specifications are subject to change without prior notice!
Certification and Approvals
:
CE, FCC
Hyper Dimming
Wide Voltage Range Input
IP65 OSD Fornt Panel Design
Anti-Shock and Vibration
Anti-Corrosion & IP Proof
Touchscreen/ Protection Glass
:
:
:
:
:
:
:
Dimming knob control backlight brightness from nearly 0% to 100%
Transflective film technology enhance visibility
IP65 aluminum housing with powder coating design (IP54 rear)
24V DC Isolated Power Module approve by DNV
High quality touchscreen / AR protection glass for option
PIP(picture in picture) function and multi-video inputs
Ease of use front panel OSD control
Enhanced shock and vibration resistance
Multiscan Function
:
D-SUB 15P connector(female)
RCA phono plug
S-Video (SVHS) plug
DVI-D input 24pin connector
Screw terminal block
Std IEC Inlet
D-SUB 9P connector (female)
D-SUB 9P connector (female)
Mechanical and Environmental:
Mechanical Mounting
Operating Temperature
Operating Humidity
Anti-Vibration
Anti-Shock
* SAW touch for IP54
Panel (Flush) mount with IP65*, VESA, Bracket mounting
-10 to 55 deg.C (-20 to 60 deg.C for optional heating)
5% to 95% (non condensing)
5Hz~500Hz / 1Grms/3 Axis
15G, 11ms duraiton
:
:
:
:
:
Available Options:
AR Safety Glass Options
Transflective Options
AC power Options
Bracket Mounting Options
Touch Screen Options
:
:
:
:
:
SAW, 5 Wire Resistive
3mm Anti-reflective protection glass
Yes (Enhance Visibility)
Yes (90 to 265 V AC power input)
Yes (One robust bracket can adjust from -10 to 30 deg.)
Power Specifications:
Power Supply Options
Power Consumption
:
:
24V DC Isolated Power Module approve by DNV
70 W typical, normal operation
IP65 OSD
Front Panel
Front Bezel
Touch / Glass
(Optional)
Panel
(Optional)
Inverter Board
Wide Voltage Range Power Module
Touch Controller
Metal Frame
Scaling Board
Front View
Side View
Rear View
Bottom View
9to36V DC
Terminal Block
RS232
for Touch
S-Video
Composite
DVI
VGA
RS232
Remote Control
for
GND
*
Note: this is a simplified drawing and some components are not marked in detail.
Please contact our sales representative if you need further product information.
Modularized Construction
Cutout
Revised Date : 03/15/2012