Impulse R19L300-MRA1 - Manual

Model # R19L300-MRA1
Marine Bridge System Display Marine Bridge System Display
19"
Marine Bridge System Display
19"
Sunlight Readable
Features:
Mechanical Design Drawings
TFT Characteristics:
Pixel Number
Pixel Pitch(RGB)
Contrast Ratio
Light Intensity
Viewable Angles
Active Display Area
Max Colors
1280 x 1024
0.294 (H) x 0.294 (V) mm
1000:1(typ.)
400 cd/m (typ.)
-85~85(H);-80~80(V)
376.32 (H) x 301.06(V) mm
16.7M (8bit/colors)
2
:
:
:
:
:
:
:
User Controls:
Input Signals:
RGB Signal
Composite Video
S-Video Signal
DVI-D Signal
DC Power Signal
Touch Screen (Optional)
Remote via RS-232 (Optional)
AC Power Signal (Optional)
:
:
:
:
:
:
:
:
Power On/Off via front button
VR Brightness Knob Control
Power Mode Status LED
On Screen Display control(OSD)
OSD Remote Control via RS-232
Note: All Specifications are subject to change without prior notice!
Hyper Dimming
Wide Voltage Range Input
IP65 OSD Fornt Panel Design
Anti-Shock and Vibration
Anti-Corrosion & IP Proof
Touchscreen/ Protection Glass
:
:
:
:
:
:
:
Dimming knob control backlight brightness from nearly 0% to 100%
IP65 aluminum housing with powder coating design (IP54 rear)
24 V DC to DC power input acceptable
High quality touchscreen / AR protection glass for option
PIP(picture in picture) function and multi-video inputs
Ease of use front panel OSD control
Enhanced shock and vibration resistance
Transflective film technology enhance visibility
(Isolation Resistance)
Multiscan Function
:
D-SUB 15P connector(female)
RCA phono plug
S-Video (SVHS) plug
DVI-D input 24pin connector
Screw terminal block
Std IEC Inlet
D-SUB 9P connector (female)
D-SUB 9P connector (female)
Certification and Approvals : IEC 60945, DVN 2.4, IACS-E10
DNV Type Approval, CE, FCC
Revised Date : 03/27/2012
Note: this is a simplified drawing and some components are not marked in detail.
Please contact our sales representative if you need further product information.
Type Approved
Product
Mechanical and Environmental:
Mechanical Mounting
Operating Temperature
Operating Humidity
Anti-Vibration
Anti-Shock
* SAW touch for IP54 Panel (Flush) mount with IP65*, VESA, Bracket mounting
-10 to 55 deg.C (-20 to 60 deg.C for optional heating)
5% to 95% (non condensing)
5Hz~500Hz / 1Grms/3 Axis
15G, 11ms duraiton :
:
:
:
:
Available Options:
AR Safety Glass Options
Transflective Options
AC power Options
Touch Screen Options
Bracket Mounting Options
:
:
:
:
: SAW, 5 Wire Resistive
(90 to 265 V AC power input)
Yes (One robust bracket can adjust from -10 to 30 deg.)
3mm Anti-reflective protection glass
Yes (Enhance Visibility)
Yes
Power Specifications:
Power Supply Options
Power Consumption
:
:
24 V DC power supply with Terminal block (Default, Isolation
Resistance)
45 W typical, normal operation
IP65 OSD
Front Panel
Front Bezel
Touch / Glass
(Optional) Panel
(Optional)
Inverter Board
Wide Voltage Range Power Module
Touch Controller
Metal Frame
Scaling Board
Front View
Side View
Rear View
Bottom View
24V DC
Terminal Block
RS232
for Touch
S-Video
DVI
VGA
GND
Modularized Construction
RS232 for
Remote Control
Composite
Cutout