Impulse R20L100-65A2 - Manual

Mechanical Drawing
Full IP65 Chassis LCD
20.1" (Stainless Design)
Specifications
* Note: this is a simplified drawing and some components are not marked in detail.
Please contact our sales representative if you need further product information.
2
Opt iona l:
bl ac k, hi gh po lish, vani shed co at ing
St and ard:
brushed stainl ess
1.0 Drawing change Mar-19-09
Rev. Reasons Revised Date
Mounting Stand
(optional)
Model Name
Viewable Size Image
Active Display Area(mm)
Pixel Pitch(mm)
Number of Pixels
Contrast Ratio
Display Color
Brightness(cd/m )
Viewing Angle(CR>=10)
Synchronization Range
Horizontal/Vertical
Recommended Resolution
Signal Connector
I/O
Power Source
Power Consumption
Power Management
Plug & Play
Optional Touch Screen
Optional video
Mounting Stand
*Due to Panel material's deviation, different panel supplier will set different specific
variance range to optical characteristics. The factors of time used, Lamp current,
Ambient temperature will influence the optical measurements.
R20L100-65A2
20.1"
408.0 (H) x 306.0 (V)
0.255(H) x 0.255(V)
1600x1200
800:1(typ.)
16.7M (8bits/color)
300(typ.)
-89~89 (H); -89~89 (V)
31.5~80.0KHz / 60~75Hz
1600x1200@60HZ,75HZ
15 pin D-Sub
3 pin Power cable(IP65 connector);
10 pin VGA cable (IP65 connector);
Optional 10 pin RS232 or USB cable(IP65 connector)
DC 12V
41W typical, normal operation
VESA DPMS Compliant
VESA DDC 1/2B
Resistive
Yes
Optional