ADS-TEC VMT6010/6012/6015 - Manual (Page 23)

VMT6010/6012/6015 22
© ads‐tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden‐Echterdingen
Abb. 12:
If no RFID reader is found,you have the opportunity to select the serial port to which the RFID reader is
connected manually.
Abb. 13:
After selection of the COM port, the application opens the por whicht is now ready to receive data. A
transponder data are output in the surface.