ADS-TEC VMT6008 - Manual (Page 15)

VMT6008 14
© ads‐tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden‐Echterdingen
Note:
If the software keyboard is not installed, only the functions for display settings and
volume control are active. When changing the values, no representation is visible
on the screen. The key functions can have been previously modified in accordance
with customer specific requirements. The above described functions are pre‐set ex
works.
Version 2 (State from Q2/2010)
ON / OFF pushbutton of the device (ATX functionality)
The operating system is shut down, but the device is not disconnected
from the input voltage.
Depending on the actual equipment version, each device is equipped with an operating system
(Windows CE 6.0, Windows XP embedded or Windows XP Professional) ex works, and a soft
keyboard is installed. The keys on the front panel are pre‐allocated with the following functions
by a specific driver in the soft keyboard:
Level 1:
Activate and deactivate the soft keyboard for letter/character input by
using the touch screen.
Level 2:
Decrease display brightness.
Level 1:
Change task (Alt+ESC) in Windows.
Level 2:
Increase display brightness.
Level 1:
Not allocated. The configuration of this level can be customised by
programming via the soft keyboard programme
Level 2:
Decrease the volume of the internal speakers.
Level 1:
Right mouse‐key function.
Level 2:
Increase the volume of the internal speakers
Shift key (SHIFT) for activating the second keyboard level. This key must
be pressed simultaneously with the desired function key..