Impulse TANK-101B - Manual

w w w . i e i w o r l d . c o m
Embedded System
TANK-101B is designed with all the functions and protections compliant with targeting transport market. TANK-101B provides not only the dual core computing
power delivered by Intel® Atom™ D525, its onboard memory with CompactFlash/SATA DOM solid-state storage can withstand the severe operating environment on
board. With typical voltage at 24VDC, TANK-101B can take wide range DC input from 9V to 36V as power source. It also has COM port and CANBus with isolation
protection for device control, dual Realtek GbE LAN and 802.11b/g/n for high speed communication. TANK-101B supports all these versatile functions in a compact
enclosure yet support fanless operation.
♦ Dual core Intel® Atom™ D525 inside
♦ Wide range 9~36VDC power input
♦ Isolation protected COM and CAN communication
♦ Extended temperature fanless design support -20°C ~ 70°C (N455)
Fanless Embedded Controller with
Dual Core Intel® Atom™ D525
TANK-101B-
Features
D525
N455
Fanless
SATA
Mini DOM
An integrated circuit (IC) connected to external ports is susceptible to damaging electrostatic discharge (ESD) pulses form the operating environment and peripherals.
Additional protection can violate stringent signaling requirements, leaving design engineers with the need to balance performance and reliability.
Isolation Protection
TANK-101B-D525/N455-2011-V12
-20°C
+70°C
Performance Comparison Chart
N455 compared to N270, CPU performance
is over 30% up. Graphic 10% up.
2.50
2.00
1.50
1.00
0.50
0.00
Intel® Atom™ N270
1.60GHz 512K/L2 Cache
Intel® Atom™ N455
1.66GHz 512K/L2 Cache
Intel® Atom™ D525
1.8GHz 1MB/L2 Cache
New Dual Core Intel® Atom™ D525
Compact Flash
Mic In
SPK-Out Dual USB 2.0
Isolated CAN :
The Control Area Network (CAN) is a serial bus system, originally
developed by Bosch for use in automobiles, and now is increasingly
being used in industrial automation.
IEI TANK-101B build in on board CAN controllers, the IEI CAN
provideds bus arbitration and error detection with an automatic
transmission repeat function.
This drastically reduces the chance of data loss and ensures
system reliability and are suitable for networking intelligent I/O
devices such as sensors or actuator of machines or plants. and
on-board optical isolators along with additional protection design
protect your system and equipment against damage from ground
loops and electrostatic discharge (ESD) pulsed, which increase
system reliability in harsh environments.
CAN Controller Philips SJA1000T
CAN Transceiver TI ISO1050DUBR
Signal Support CAN_H, CAN_L
Speed (bps) 1Mbps
Connectors Two DB-9 Connectors
Isolated Protection 2500Vrms on CAN side
Reset
Power Jack
Wide Range Power Input: 9~36 VDC
Dual USB 2.0
LAN1 with ASF 2.0 support
VGA
COM3 : RS-232/422/485
Default RS422 with isolation
1. On- board 15KV ESD Protection
2. Isolated 3000 VDC Protection
Alert standard Format (ASF 2.0) is also supported to provide system
manageability in OS-absent environments. The ASF defi nes remote control
and alerting interface that serve managed PCs in OS-absent states. The
ASF capability can minimize on-site IT maintenance, improve system
availability, and allow remote control of power management.
power adaptor
12V/24V DC power supply
CPU
Memory
3D