Comprehensive CDA-V50 - Manual (Page 7)

5
5.1 Connecting the CDA-V31 1:3 Audio-Stereo / Video DA
To connect the CDA-V31 1:3 Audio-Stereo / Video DA, as the example in
Figure 4 illustrates, connect the following 1 :
1. Connect a composite video source (for example, a video player) to the
video and audio input connectors.
2. Connect the video and audio output connectors to up to 3 composite video
acceptors (for example, video recorders).
3. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not illustrated in Figure 4).
4. If required, adjust the audio level and video level.
Figure 4: Connecting the CDA-V31 1:3 Audio-Stereo / Video DA
1 Switch OFF the power on each device before connecting it to your CDA-V31. After connecting your CDA-V31, switch on
its power and then switch on the power on each device