Printer controls – CognitiveTPG A799 User Manual
Page 8
Chapter 2: About the Printer
8
A799 Two-Color Thermal Receipt Printer: User Guide
A799-UG00001 Rev. D
11/2012
Printer controls
Configuration switch (DIP switch 1)
The configuration switch allows you to change the configuration settings of the printer.
Paper feed button
During normal use, the paper feed button advances the paper. It is also used to access the configuration menu.
LED
The green LED indicates basic information about the printer status. A steady green light means the printer is on and
operating normally. A flashing LED means the printer needs operator assistance. Refer to the troubleshooting section on
page 26 for more information.
Beep
A single beep means the printer has successfully completed its startup routine. It should beep after being powered up or
reset.
If the printer beeps twice, it may be experiencing a problem. Refer to the troubleshooting section on page 26 for more
information, or use the interactive tech support tool on our website at
Connector Cover
The connector cover provides protection and strain relief for the printer connectors and cables. This cover should remain
on the printer and utilized as described in Chapter 3, Cable routing.
LED
(Green)
Paper
Feed
Button