CognitiveTPG A799 - Manual (Page 23)

Chapter 4: Using the Printer 23
11/2012 A799-UG00001 Rev. D A799 Two-Color Thermal Receipt Printer: User Guide
Chapter 4: Using the Printer
Configuring the printer
The configuration menu allows the user to set general printer parameters. The test prints the diagnostics form, which
details settings for all functions. The printer will partially cut the paper between each variation.
The printouts may vary for each model. The test ends with a partial cut of the paper. A complete test printout may require
the use of several feet of paper.
Since the printer is usually shipped pre-configured, most users do not need to change the configuration of the printer. If
you make adjustments to the configuration, be careful not to inadvertently change settings that may affect the printer’s
performance. CognitiveTPG does not recommend that users change the printer configuration.
Additional information on configuring the printer is found in the A799 Programming Guide.
Hint: The printer is shipped with a test printout that includes the preset configuration. If you run into problems after
changing the printer configuration, use these settings as a default. For guidance or assistance, you may contact a
CognitiveTPG representative.