CNB IJB2000 - Manual (Page 17)

XNET Network Video Server Installation Manual
17 / 18
5. Specifications
IJB2000 Specifications
Video Signal
Input Signal 1ch Input Composite by B3, B4, B5, B6 Series
Signal Select NTSC/PAL (Manual)
Compatible Camera Model B3 / B4 / B5 / B6 Series all models
Video / Audio
Compression MJPEG / MPEG4 / H.264
Frame rate
Single Mode : Main(H.264@30fps) *D1
Dual Mode : Main(H.264/MPEG4, 30fps), Second(MPJEG) *D1
Resolution
D1 (NTSC: 704 x 480 / PAL: 704 x 576)
CIF (NTSC : 352 x 240 / PAL: 352 x 288)
Video streaming
MJPEG / H.264(or MPEG4) Dual mode
Constant and variable bit rate in MPEG4 (128kbps ~ 3M bps)
Controllable frame rate and bandwidth
Image settings
Compression level setting
Configurable Brightness, Sharpness, White Balance
Audio Two-way (full duplex / ADPCM, G.726)
Network
Protocol
Ipv4, HTTP, HTTPs, UDP, TCP, RTSP, RTP, SMTP, FTP, ICMP, DHCP, UPnP, Bonjour,
ARP, DNS, DynDNS, NTP, IGMP(Multicast) *) OnVif
Supported DDNS
1. CNB DDNS 2. DynDNS.org
3. Reference code with SDK
LAN Interface Ethernet 10/100 Base-T (RJ-45 Type)
Security
Access level setup Multiple user access levels with password protection
Network Security IP Filtering
Alarm and Event
Management
Image detection Motion detection (Select 3 Regions - each area)
Sensor detection Sensor In, Scheduling, Alarm out
After Event process JPEG Image upload over FTP server / SMTP (E-mail server)
Local storage
JPEG Image write to Internal memory
- Internal memory : Max 32MByte
Pre / Post alarm
Detail time-set : Max Pre alarm 5 sec / Post alarm 8 sec
Local storage (Internal memory : JPEG image)
Applications
Browser Internet Explorer 6.0 over
Monitoring Application XNET NVR, CNB CMS and Utility (IP-Installer, etc), 3rd party SW
Maintenance
System Upgrade Firmware upgrade over HTTP
PTZ control (RS-485) PTZ Protocol Service (User define update)
Mechanical
Operating Temperature -10℃ ~ 50℃
Power DC 12V Max. 5 W
Dimensions 198(D) x 160(W) x 58(H)mm