CNB IJB2000 - Manual (Page 14)

XNET Network Video Server Installation Manual
14 / 18
4. Using Web Viewer
Connecting to network devices can be done using internet web browser or “XNET-CMS” software. This
manual explains about using internet web browser only. For instructions on how to configure network
connection using XNET-CMS software, please refer to XNET-CMS Manual, which can be found in the
installation CD.
4 4 . . 1 1 . . L L o o g g g g i i n n g g I I n n
Enter the IP address of the device on the address bar of your web browser and press enter key. Then the
following webpage will appear:
Figure 4-1. Log-in Box
Enter the user name and password to bring up the web viewer page. The default id and password is
“root”, “admin” respectively. If you want to use a different HTTP port number from the default value,
simply put a colon and port number at the end of the IP address. (For example, enter the following
address when changing the port to 8080: http://192.168.123.100:8080)
(When using default IP address and port number) http://192.168.123.100
(When IP address and port number changed) http://IP address: new port number
If you forget the administrator’s password, “Factory Reset” is the only way to regain
access. However, since this will retrieve all default settings, the network settings
have to be configured again using the IP installer.
For security, please change the administrator’s id and password from their default
values. Please save the changed ID and password in a place only accessible by an
administrator. Please refer to
[Web Viewer Manual] for detail .