CNB IXP3035VR - Manual (Page 9)

XNET Network Weatherproof Camera Installation Manual
9 / 23
Analog Video Output
This output can be used to check the video during the installation.
Use the supplied BNC connector
Connect the adapter to a video cable with BNC termination.
(Select Video Out in menu to enable this output)
Audio Connection
MIC/Line Input (Mono) RED
Connect this wire to the Audio input. The audio input can come from a microphone or an Audio device.
Line Output (Mono) WHITE
This is an Audio signal output to a Power Amplified device or a Speaker. In two way audio
communication using the XNET system, this can be used to listen to the audio from a remote PC.
Network Cable
This RJ-45 Ethernet terminal connects to a 100Mbps LAN. When an optional PoE is used, the power will be
supplied from the Network Cable. Network cable of this product is not water-resistant.
Do not connect anything to power connector when the product is getting its power
from LAN cable. (PoE) The product is not covered under warranty when it is
damaged by connecting Power over Ethernet and another power supply at the same
time.