CNB IDC4050F - Manual (Page 24)

XNET User Manual
24 / 46
ITEM DESCRIPTION
RTSP
Configuration
RTSP Port
Enter RTSP Port of the Main Stream between 1 and 65535.
The default is 554.
RTP
Configuration
RTP Start Port
Enter RTP Start Port between 1024 and 65534.
The default is 2000.
The minimum difference between RTP Start and End Port should be
100.
RTP End Port
Enter RTP End Port between 1124 and 65535.
The default is 3000.
The minimum difference between RTP Start and End Port should be
100.
Maximum
number of
users to
connect
Enter the maximum allowable number of users connected to the
Stream between 1 and 10. However, it can be vary depending on Main
Stream’s Bit Rate.
MAX. number of users to connect = 15Mbps / Main Stream’s Bit Rate
(1<= MAX. number of users to connect <= 10)
Save - Applies and saves changes.
Reset - Recalls previously saved configurations.