CNB IDC4050F - Manual (Page 22)

XNET User Manual
22 / 46
ITEM DESCRIPTION
Main Stream
(H.264)
Resolution
Select a resolution of the video image.
Selectable resolutions differ by models like the following:
CIF | VGA | D1 | 720p | SXGA | 1080p
Enable
Dual-Codec
Turns Sub Stream feature on or off.
Sub Stream output is in H.264 & MJPEG Codec.
When configuring, select Main Stream or Sub-Stream in the Live View
page.
“Enable Dual-Codec checkbox” is enabled when Codec is set up as CIF
| VGA | D1 | 720p
Frame rate
Selects Frame rate of Video.
Video Type Frame rate
NTSC 1, 5, 15, 30
PAL 1, 5, 12.5, 25
Quality Select MJPEG’s video quality between 10 and 100.
Bit rate
Selects bit rate for MPEG4 or H.264 video signal between 384kbps and
5Mbps.
Sub Stream
(H.264 /
MJPEG)
Codec
Selects Video Codec.
Codec Resolution
H.264 QVGA | CIF
MJPEG QVGA | CIF | VGA | D1
Resolution
Select resolution of sub stream video among QVGA | CIF | VGA | D1
depending on Main Stream’s resolution and Sub Stream’s codec.
Frame rate
Sub Stream’s frame rate is completely depending on Main Stream’s
Frame rate, so user can not modify sub stream’s frame rate.
Bit rate
(H.264)
Selects bit rate for sub stream.
[CIF]: 64k, 128k, 256k, 386k, 512k
[D1]: 128k, 256k, 384k, 512k, 640k, 768k, 896k, 1M
MJPEG
Quality
(MJPEG)
Select sub stream video quality between 10 and 100.
Video Out
Enable Video
Out
Turns the Video Out feature on or off.
or less.>
Video Format Selects Video format at Video Out terminal between
NTSC and PAL.
Save - Applies and saves changes.
Reset - Recalls previously saved configurations.