Jungheinrich ETV_214-216 - Manual (Page 3)

1) different battery sizes change these values
2) mast-dependent
3) With Drive & Lift Plus options package
4) With Drive Plus options package
5) With Lift Plus options package
6) With load wheel cover: + 30 mm
In accordance with VDI Guideline 2198 this specification sheet provides details of the standard truck only. Non-standard tyres, different masts, optional equipment, etc. may result in
different values.
Technical data in line with VDI 2198
Issue: 09/2013
Identifica
tion
1.1 Manufacturer (short form) Jungheinrich
1.2 Model ETM 214 ETV 214 ETM 216 ETV 216
1.3 Drive Electrics
1.4 Manual, pedestrian, stand-on, seated, order picker operation transverse seat
1.5 Load capacity/rated load Q t 1.4 1.4 1.6 1.6
1.6 Load centre distance c mm 600
1.8 Load distance x mm 353 1) 423 1) 403 1) 413 1)
1.8.1 Load distance, mast reached forward x
1
mm 205
1.9 Wheelbase y mm 1410 1410 1460 1460
W
eights
2.1.1 Net weight incl. battery (see row 6.5) kg 2975 3000 3110 3136
2.3 Axle load, w.o. load, front / rear kg 1785 / 1190 1830 / 1170 1835 / 1275 1882 / 1254
2.4 Axle loading forks forward with load at front / rear kg 481 / 3894 572 / 3828 518 / 4192 521 / 4215
2.5 Axle loading forks retracted with load at front / rear kg 1531 / 2844 1628 / 2772 1649 / 3061 1658 / 3078
Wheels /
chassis
3.1 Tyres Vulkollan ®
3.2 Tyre size, at front mm Ø 343 x 114
3.3 Tyre size, at rear mm Ø 285 x 100
3.5 Wheels, number front/rear (× = driven wheels) 1x / 2
3.7 Track width, rear b
11
mm 986 1136 986 1136
Basic dimensions
4.1 Tilt of mast/fork carriage forward/backward α/ β ° 1/3 2)
4.2 Mast height (lowered) h
1
mm 2400
4.2.1 Total height h15 mm
4.3 Free lift h
2
mm 1756
4.4 Lift h
3
mm 5600
4.5 Extended mast height h
4
mm 6244
4.7 Height of overhead guard h
6
mm 2190
4.8 Seat height/stand height h
7
mm 1057
4.10 height of support arms h8 mm 285 6)
4.19 Overall length l
1
mm 2418 1) 2346 1) 2418 1) 2408 1)
4.20 Length incl. back of forks l
2
mm 1268 1) 1198 1) 1268 1) 1258 1)
4.21 Total width b
1
/b
2
mm 1120 / 1120 1270 / 1270 1120 / 1120 1270 / 1270
4.22 Fork dimensions s/e/l mm 40 / 120 / 1150
4.23 Fork carriage ISO 2328, class/type A, B 2B
4.24 Fork carriage width b
3
mm 830
4.25 Width over forks b
5
mm 335 / 560 335 / 730 335 / 560 335 / 730
4.26 Width between support arms/loading surfaces b
4
mm 780 940 780 940
4.28 mast reach l
4
mm 558 1) 628 1) 608 1) 618 1)
4.32 Floor clearance centre wheelbase m
2
mm 80
4.32.1 Ground clearance at lowest point mm 30
4.33 Aisle width for pallets 1000 × 1200 sideways Ast mm 2702 1) 2652 1) 2716 1) 2709 1)
4.34 Aisle width for pallets 800 × 1200 lengthways Ast mm 2757 1) 2694 1) 2762 1) 2753 1)
4.35 Turning radius W
a
mm 1620 1620 1670 1670
4.37 length over the support arms l
7
mm 1780 1780 1830 1830
Performance da
ta
5.1 Travel speed, w. / w.o. load km/h 14 / 14 4)
5.2 Lift speed, w. / w.o. load m/s 0.51 / 0.7 5) 0.51 / 0.7 5) 0.48 / 0.7 5) 0.48 / 0.7 5)
5.3 Lower speed, w. / w.o. load m/s 0.55 / 0.55
5.4 Traverse speed w. / w.o. load m/s 0.24 / 0.24 5)
5.7 Gradeability laden/unladen % 9 / 13 9 / 13 8 / 12 8 / 12
5.8 Max. gradeability, laden/unladen % 10 / 15
5.9 Acceleration time w. / w.o. load S 4.6 / 4.3 4)
5.10 Service brake electric
Electrics
6.1 Drive motor rating S2 60 min. kW 6.9 4)
6.2 Lift motor rating at S3 15% kW 14.0 5)
6.3 Battery according to DIN 43531/35/36 A,B,C, no DIN 43531 - B DIN 43531 - C DIN 43531 - B DIN 43531 - C
6.4 Battery voltage/nominal capacity K5 V/Ah 48 / 465
6.5 Battery weight kg 750
6.6 Energy consumption according to VDI cycle kWh/h 3.4 3) 3.4 3) 3.6 3) 3.6 3)
6.7 Throughput efficiency t/h 64 3) 64 3) 73 3) 73 3)
6.8 Energy consumption at max. throughput kWh/h 3.7 3) 3.7 3) 3.8 3) 3.8 3)
Misc.
8.1 Type of drive control Mosfet / AC
8.2 working pressure for attachments bar 150
8.3 oil flow for attachments l/min 20
8.4 Sound pressure level at operator’s ear according to EN 12053 dB (A) 68