Jungheinrich ETV_110-112 - Manual (Page 3)

1) different battery sizes change these values
2) in load direction 10 km/h
3) mast-dependent
In accordance with VDI Guideline 2198 this specification sheet provides details of the standard truck only. Non-standard tyres, different masts, optional equipment, etc. may
result in different values.
Technical data in line with VDI 2198
Issue: 03/2011
Identifica
tion
1.1 Manufacturer (short form) Jungheinrich
1.2 Model ETV 110 ETV 112
1.3 Drive Electrics
1.4 Manual, pedestrian, stand-on, seated, order picker operation transverse seat
1.5 Load capacity/rated load Q t 1 1.2
1.6 Load centre distance c mm 600
1.8 Load distance x mm 345 1) 430 1)
1.8.1 Load distance, mast reached forward x
1
mm 170
1.9 Wheelbase y mm 1300 1385
W
eights
2.1.1 Net weight incl. battery (see row 6.5) kg 2560 2580
2.3 Axle load, w.o. load, front / rear kg 1587 / 973 1587 / 993
2.4 Axle loading forks forward with load at front / rear kg 634 / 2926 516 / 3264
2.5 Axle loading forks retracted with load at front / rear kg 1282 / 2278 1361 / 2419
Wheels /
chassis
3.1 Tyres Vulkollan ®
3.2 Tyre size, at front mm Ø 343 x 114
3.3 Tyre size, at rear mm Ø 230 x 85
3.5 Wheels, number front/rear (× = driven wheels) 1x / 2
3.7 Track width, rear b
11
mm 993
Basic dimensions
4.1 Tilt of mast/fork carriage forward/backward α/ β ° 1/3 3)
4.2 Mast height (lowered) h
1
mm 2300
4.2.1 Total height h15 mm
4.3 Free lift h
2
mm 1658
4.4 Lift h
3
mm 5300
4.5 Extended mast height h
4
mm 5942
4.7 Height of overhead guard h
6
mm 2150
4.8 Seat height/stand height h
7
mm 1057
4.10 height of support arms h8 mm 265
4.19 Overall length l
1
mm 2315 1)
4.20 Length incl. back of forks l
2
mm 1165 1)
4.21 Total width b
1
/b
2
mm 1120 / 1120
4.22 Fork dimensions s/e/l mm 40 / 80 / 1150
4.23 Fork carriage ISO 2328, class/type A, B 2B
4.24 Fork carriage width b
3
mm 800
4.25 Width over forks b
5
mm 296 / 677
4.26 Width between support arms/loading surfaces b
4
mm 900
4.28 mast reach l
4
mm 515 1) 600 1)
4.31 Floor clearance with load under mast m
1
mm 85
4.32 Floor clearance centre wheelbase m
2
mm 80
4.32.1 Ground clearance at lowest point mm 30
4.33 Aisle width for pallets 1000 × 1200 sideways Ast mm 2603 1) 2628 1)
4.34 Aisle width for pallets 800 × 1200 lengthways Ast mm 2659 1) 2668 1)
4.35 Turning radius W
a
mm 1515 1600
4.37 length over the support arms l
7
mm 1640 1725
Performance da
ta
5.1 Travel speed, w. / w.o. load km/h 11 / 11 2)
5.2 Lift speed, w. / w.o. load m/s 0.48 / 0.7 0.43 / 0.7
5.3 Lower speed, w. / w.o. load m/s 0.5 / 0.5
5.4 Traverse speed w. / w.o. load m/s 0.2 / 0.2
5.7 Gradeability laden/unladen % 7 / 10
5.8 Max. gradeability, laden/unladen % 10 / 15
5.9 Acceleration time w. / w.o. load S 4.8 / 4.4 4.9 / 4.4
5.10 Service brake electric
Electrics
6.1 Drive motor rating S2 60 min. kW 6.9
6.2 Lift motor rating at S3 15% kW 10.0
6.3 Battery according to DIN 43531/35/36 A,B,C, no DIN 43531 - B
6.4 Battery voltage/nominal capacity K5 V/Ah 48 / 280
6.5 Battery weight kg 556
Misc.
8.1 Type of drive control Mosfet / AC
8.2 working pressure for attachments bar 150
8.3 oil flow for attachments l/min 20
8.4 Sound pressure level at operator’s ear according to EN 12053 dB (A) 68