INTELLINET NETWORK 524711 Wireless 300N Outdoor PoE Access Point User Manual - Manual (Page 71)

65
3-2 Firmware Upgrade
If there is new firmware available for this wireless access point, you
can upload it to the access point to incorporate added functions or
to effect solutions to problems.
To perform a firmware upgrade, click Upgrade on the left side of the
Web management interface, and the following will be displayed:
Click “Browse” first: You’ll be prompted to provide the filename of
the firmware upgrade file. After a firmware upgrade file is selected,
click “Apply” and the access point will start the firmware upgrade
procedure automatically. The procedure may take several minutes,
so be patient.
NOTE: Never interrupt the upgrade procedure by closing the Web
browser or physically disconnecting your computer from the access
point. If the firmware you uploaded is corrupt, the firmware upgrade
will fail and you may need to return this access point to the dealer for
help.