INTELLINET NETWORK 524711 Wireless 300N Outdoor PoE Access Point User Manual - Manual (Page 64)

58
Enable Wireless
Access Control Check this box to enable MAC address
restriction. If unchecked, no restriction will be
enforced (any wireless client with the proper
encryption setting will be able to connect to
this wireless access point).
MAC address Input a MAC address allowed using this
wireless access point here. You don’t have to
add a colon (:) or hyphen (-) yourself: Just
input 0 to 9 and a to f here; e.g.,
112233445566 or aabbccddeeff.
Comment You can input any text here as a comment for
this MAC address; e.g., “Room 2 Computer.”
Input up to 16 alphanumerical characters. This
is optional and you can leave it blank; but it’s
recommended that you write a comment for
every MAC address as a memory aid.
Add When you finish inputting a MAC address and
(optional) comment, click to add the MAC
address to the list.
Clear Remove all characters in the “MAC address”
and “Comments” fields.
After you finish with the settings, click “Apply” and the following
message will be displayed:
When you see this message, the settings you made are
successfully saved. Click “Continue” to go back to the previous
page and continue with other setting, or click “Apply” to restart the
wireless access point. Changes will take effect after about 30
seconds.