INTELLINET NETWORK 524711 Wireless 300N Outdoor PoE Access Point User Manual User Manual

Page 34

Here are descriptions of every setup item:

Band

Select the wireless band you wish to use. By
selecting different band settings, you’ll be able
to allow or deny the wireless client of a certain
band.

If you select 2.4 GHz (B), 2.4 GHz (N) or 2.4
GHz (G), only wireless clients using the
wireless band you select (802.11b, 802.11
Draft-N or 802.11g) will be able to connect to
this access point.

If you select 2.4 GHz (B+G), then only wireless
clients using 802.11b and 802.11g bands will
be able to connect to this access point.

If you want to allow 802.11b, 802.11g and
802.11 Draft-N clients to connect to this
access point, select 2.4 GHz (B+G+N).

Channel

Number

Select a channel number you wish to use. The
channel number must be the same as another
wireless access point you wish to connect

MAC address 1

Input the MAC address of the wireless access
point you wish to connect.

Set Security

Click this button to select an encryption mode
for this wireless link. A new popup window will
appear. Refer to Section 2-7 for detailed
descriptions.