INTELLINET NETWORK 560542 8 Ports Gigabit PoE+Web Management Desktop Ethernet Switch User Manual - Manual (Page 9)

9
WEB-BASED BROWSER MANAGEMENT
SNMP Write Community: Any 20 characters. Default: private. This parameter
identifies the MIB tree(s) to which this entry authorizes write access.
SNMP Trap Community: Any 20 characters. Default: public. This parameter
identifies the MIB tree(s) to which this entry authorizes access for notifications.
Ports
The settings on these screens — including Mode and Flow Control — allow you to
configure the functions of each port, in part so you can limit the number of devices
using a switch port and protect against MAC flooding attacks. Select the port number
and set its functions, then click Apply to save the new settings to the device.
Enable Jumbo Frames: Select/enable to adjust the size of jumbo frames. This
switch provides more efficient throughput for large sequential data transfers by
supporting jumbo frames on Gigabit Ethernet ports up to 9600 bytes. Compared
to standard Ethernet frames that run only up to 1500 bytes, using jumbo frames
significantly reduces the per-packet overhead required to process protocol
encapsulation fields.