INTELLINET NETWORK 560542 8 Ports Gigabit PoE+Web Management Desktop Ethernet Switch User Manual - Manual (Page 14)

14
WEB-BASED BROWSER MANAGEMENT
providing load balancing and fault tolerance for uplink connections.
LACP Port Configuration
Port: Indicates the port number to be configured.
Protocol Enabled: Enables LACP on the associated port.
Key Value: Configures a port’s LACP administration key. The port administrative
key must be set to the same value for ports that belong to the same link
aggregation group (LAG). If this administrative key is not set when an LAG is
formed (i.e., it has the null value of 0), this key will automatically be set to the
same value as that used by the LAG.
RSTP
The IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) provides a loop-free
network and redundant links to the core network with rapid convergence to ensure
faster recovery from failed links, enhancing overall network stability and reliability.
RSTP System Configuration
System Priority: Options range from 0 to 61440. Default: 32768. This parameter
configures the spanning tree priority globally for this switch. The device with the
highest priority becomes the STP root device. However, if all devices have the
same priority, the device with the lowest MAC address will then become the root
device.
Hello Time: Enter a value from 1 to 10. Default: 2. This is the interval (in seconds)
at which the root device transmits a configuration message (BPDU frame).
Max Age: Enter a value from 6 to 40. Default: 20. This is the maximum time (in
seconds) a device can wait without receiving a configuration message before
attempting to reconfigure. It also equals the maximum lifetime of a BPDU frame.
Forward Delay: Enter a value from 4 to 30. Default: 15. This is the maximum time
(in seconds) the root device will wait before changing states (i.e., discarding to
learning to forwarding).
Force Version: Select Normal (default) to support only RSTP, or Compatible to
support both STP (802.1d) and RSTP.