INTELLINET NETWORK 560542 8 Ports Gigabit PoE+Web Management Desktop Ethernet Switch User Manual User Manual

Page 26

WEB-BASED BROWSER MANAGEMENT

Reboot

Click

Yes to restart the switch. The reset is complete when the Power LED stops

blinking.

Factory Default

This function is to force the switch back to the original factory settings. To reset the

switch, select

Reset to Factory Defaults from the drop-down list and click Apply.

The LAN IP Address, Subnet Mask and Gateway IP Address will be reset to their

factory settings.

Software Upload

Select

Upgrade Firmware from the Tools drop-down list, click Browse to select

the firmware file, then click

Upload.

Configuration File Transfer

This allows you to save the switch’s current configuration or restore a previously

saved configuration back to the device. Configuration files can be saved to any lo-

cation on the Web management station. Click

Browse to find a configuration file,

then click

Upload to save it or Download to restore it.

Logout

The administrator has write access for all parameters governing the onboard agent,

so you should assign a new administrator password as soon as possible and store

it in a safe place.