INSTEON Diagnostic Keypad (2993-222) - Manual (Page 9)

Page 9 of 10 2993-xx2 - Rev: 3/11/2014 9:21 AM 9:21:55 AM
INSTEON responder N/A
Maximum links / scenes 1
LED White when a particular test mode is active.
LED brightness Constant
Local control N/A, not a load controller
Commands supported as controller On, Off, Beep
Commands supported as responder N/A, not a load controller
RF range N/A, powerline only
Phase bridge detect beacon N/A, powerline only
X10 – not supported
Mechanical
Mounting
Tabletop enclosure
Wires
Standard lamp cord
Screw clamp connections N/A
Case color White
Set button 1
Plastic UV stabilized polycarbonate
Beeper Yes
Beep on button press N/A
LED White
Operating environment Indoors
Operating temperature range 32
o
to 104
o
F
Operating humidity range 0-85% relative humidity
Electrical
Voltage
2993-222: 110VAC (+/- 10%)
2993-422: 240VAC (+/- 10%)
Frequency 50/60Hz
Load type(s) N/A, not a load controller
Maximum load N/A, not a load controller
Minimum load N/A, not a load controller
User replaceable fuse N/A
Hardwired remote control N/A
Retains all settings without power Yes, saved in non-volatile EEPROM
Standby power consumption < 1 watt
FCC ID N/A, powerline only
Safety approval(s) ETL (Intertek Testing Services)