Hach-Lange TITRALAB Users Guide - Manual (Page 74)

74 Chapter 5
1
Result no. 13 / 19
Result no. 14 / 19
1
Electr Electr Electr Electr Electrode calibration r ode calibration r ode calibration r ode calibration r ode calibration results esults esults esults esults
The last 100 electrode calibration results are saved in the archives.
Once you have selected the electrode then the result (see first page of
this chapter), the following data are displayed (for a pH calibration):
Mean calculated on 3 cycles
performed and accepted. Each
cycle has been run using 2 buffer
solutions. Result of cycle no. 3 (cycle
accepted). This cycle has been
run using 2 buffer solutions.
19 is the
number of
results
saved for
the
selected
electrode.
Scroll the results.
The results can be: cycle performed on a standard, mean calculated on
several cycles performed on the same standard or current calibration
data. "TIM" (or "SAC") means that a TIM (or SAC) method has been run.