Hach-Lange TITRALAB Users Guide - Manual (Page 35)

Getting started 35
1. Press 4 or select the line Method library and press
✓ to enter the
Method library screen. Press Esc to return to the Main window.
2. Select the line Working mode and press
✓. The following
options are available:
Method: to run a single method.
Sequence: to create or run a sequence of methods. Beakers are
manually changed between two method runs.
SAC Method: to run a single method to be performed using a
sample changer.
SAC Sequence: to create or run a sequence of methods to be
performed using a sample changer.
Reprocessing: to reprocess the last curve with different parameters
from the original method and thus recalculate a result.
If you select a Reprocessing working mode, the Method, Reagent
and Electrode tabs display a calculator icon as shown below:
Note: the working mode selected will have no effect on the type of
method you wish to create.
Do not forget to define the sample changer in the Configuration
menu before selecting SAC Method or SAC Sequence.
3 Press
✓ to confirm your selection.