Hach-Lange BIOGAS User Manual - Manual (Page 35)

35
Standard Operations
2. Press 1 (New electrode).
3. Press the validation key in the Function field
4. Select the function of the electrode, refer to the
Table 3 .
5. Press the validation key in the ID field.
6. Select Other in the From field.
Note: The option From = Catalogue allows you
to create an electrode from a list of
preprogrammed electrodes.
7. Enter the identification (ID) of the electrode, (up
to 16 characters).
8. Press 1 twice.
9. Select the electrode Type, for electrodes with
pH or mV functions:
•
Single pH - pH electrode (no reference
part),
• Combined pH - pH electrode with a refe-
rence part (with or without temperature
sensor),
• Single metal/redox - mV (i=0) function
electrode with a reference part,
• Combined metal/redox - mV (i=0) func-
tion electrode with a reference part (with or
without temperature sensor).
Table 3 Electrode functions
Electrode type Select function
pH single pH
pH combined w/wo temp. sensor pH pH
Single metal/redox mV (i=0)
Combined metal/redox w/wo temp. sensor mV (i=0)
ISE single mV (i=0)
ISE Combined w/wo temp. sensor mV (i=0)
Reference single Reference
Temperature sensor T°C
Ground metal Ground
Double metal mV (i>0)