Hach-Lange DR 6000 User Manual - Manual (Page 126)

126
Expanded programs
4. Define the required unit for the interval. Press OK to confirm
the entry.
6.7.4.3 Multiple Determination
1. Press Multiple Determination.
2. Press Reminder.
3. Press On.
4. Select the required interval. Press OK to confirm the entry.
5. Select a unit for the interval. Press OK to confirm the entry.
6. Enter the number of measurements for multiple definitions.
Press OK to confirm.
7. Enter the tolerance as a percentage. Press OK to confirm.
8. Press OK to confirm all the entries.
6.7.4.4 Dilution
1. Press Dilution.
2. Press On.
3. Select the required interval. Press OK to confirm the entry.
4. Select a unit for the interval. Press OK to confirm the entry.
5. Enter the dilution factor. Press OK to confirm.
6. Enter the tolerance as a percentage. Press OK to confirm.
7. Press OK to confirm all the entries.
6.7.4.5 Performing AQA measurement
If a reminder function has been set, once the set interval has
elapsed the requirement to perform an AQA measurement is
issued.