Hach-Lange FP 360 sc Basic User Manual - Manual (Page 7)

English 7
Product overview
The FP 360 sc sensor is a UV fluorimeter used to continuously measure
the concentration of PAH (polycyclic aromatic hydrocarbons) in water.
The measurement values can be converted to reflect the total oil content
for mineral oils using lab data.
The sensor may need to be installed with additional accessories
depending on its area of application.
Do not apply the sensor to any hard mechanical effects.
Product components
The sensor is available in a variety of types.
Refer to
Figure 2 to make sure that all components have been received.
If any of these items are missing or damaged, contact the manufacturer
or a sales representative immediately.
Figure 2 FP 360 sc sensor
D A N G E R
This product is not suitable for use in potentially explosive
atmospheres.
WA R N I N G
The UV rays from the flash bulb are harmful to eyes and skin.
Do not look directly through the measurement window during
operation under any circumstances. Remove the measurement
sensor from operation before carrying out any maintenance or
installation work.
Area of application Installation with Sensor variants
Open channels, shafts, tanks
(solid matter max. 200 mg/L)
Chain mount kit
Sensor with or without
cleaning unit
Measurement media without
solid matter with continuous,
low sample throughput
Flow cell
Sensor without
cleaning unit
1 FP 360 sc measurement sensor 5 6 mm fitting for cleaning unit
(depending on model)
2 Basic user manual with CD 6 Safety sleeve
3 Measurement window 7 Connector cable
4 Sensor with cleaning unit
(depending on model) 8 Shackle